Dogu · For schools
Dogu Classmate school heat recovery unit
Dogu Classmate school heat recovery unit. For classrooms: the extract grille and the supply diffuser are built into the unit. An optional CO₂ sensor sets the speed by itself.


For schools
No ducts
Classmate is Dogu's heat recovery unit for school classrooms. The extract grille and the supply diffuser are built into the unit, so it ventilates the room by itself, with no duct connections. The counterflow exchanger has high efficiency and a 100% bypass damper.
Dogu's page gives three sizes with 500, 1,000 and 1,600 m³/h nominal (from 150 to 1,600 m³/h); the spec sheet shows 500, 1,000 and 1,500 m³/h at 0 Pa. With the optional CO₂ sensor, the unit sets its own speed to the air in the classroom.
- Airflow
- 150 to 1,600 m³/h
- Sizes
- 500 · 1,000 · 1,600
- Fans
- EC plug
Features
No ducts
The extract grille and supply diffuser are built into the unit.
CO₂ sensor (optional)
The speed follows the CO₂ level in the room, so no energy is wasted.
EC plug fans
With low noise.
100% bypass
With a high efficiency counterflow exchanger.
Insulation
30 mm rock wool plus 20 mm acoustic insulation.
G4 filters
On supply and extract; M5, M6, F7, F8 or F9 on supply as needed, or ePM1 / ePM2.5.
Control
Room controller, phone or tablet, Modbus and weekly scheduling.
Options
Electric pre-heater and post-heater inside the unit, constant airflow, supply and exhaust dampers.
Technical data
| Model | CLASSMATE-05 | CLASSMATE-10 | CLASSMATE-15 |
|---|---|---|---|
| Capacity and efficiency | |||
| Airflow at 0 Pa, m³/h | 500 | 1000 | 1500 |
| Electrical power input, W | 166 | 340 | 770 |
| Power supply, V / A | 230 / 1.5 | 230 / 2.8 | 230 / 5 |
| Sound level, dB(A) | 30 | 34 | 32 |
| SPI, W/(m³/h) | 0.166 | 0.17 | 0.24 |
| Dimensions and weight | |||
| Dimensions, mm (L × W × H) | 1330 × 823 × 450 | 1600 × 1025 × 450 | 2005 × 1310 × 580 |
Product documentation
Specifications refer to the published series. We confirm the configuration, accessories and data for the proposed model in the quotation.
Selection and quotation
Comfort Clima helps identify the appropriate version and accessories for this product. Send us space usage, occupancy, required airflow and whether ductwork can be installed.
More in this category
Planning an order or project?
Send your equipment list, quantities and required date. We can help with selection and prepare a quotation for your requirements.
Contact
Tell us what you need
Whether you need one unit or equipment for an entire project, send your requirements with models, quantities and location. We will respond with a quotation and availability information.
- Call us
- +383 48 77 22 88
- Email us
- info@comfort-clima.com
- Find us
- Rruga Ukë Mavriqi 23, Shkabaj
Prishtina 10000, Kosovo - Hours
- Monday to Friday, 08:00–17:00
Your enquiry is ready to email
Complete the submission in your email application. If it did not open, call +383 48 77 22 88 or email info@comfort-clima.com.


